Telescopic Banner Stand Assembly Instruction

.

Before we start, make sure you have all your parts ready. 

The first step is to put the base and side support together.

Connect the base to a vertical pole by sliding the pole into the base. Use a screw and L shaped screwdriver to secure pole to base. Repeat for other side.

Next, take out the rubber cap from one of the horizontal poles and connect the horizontal poles together. 

Extend the horizontal poles to where it is marked.

Set the vertical poles 8 feet apart. Lay the rolled-up banner on the floor and slide the joined horizontal pole through the pole pocket at the top of the banner. 

Using the screw knobs, attach the horizontal pole with banner to the holes at the top of the vertical poles.

Extend the vertical poles while slowly unrolling the banner until the banner is hanging freely. Secure each telescoping pole by tightening clock-wise.

Now slide the other joined horizontal pole through the pole pocket in the bottom of the banner.

Using screw knobs, attach the horizontal pole with banner to the holes at the bottom of the vertical poles